Need help?Do you have a question about the Fleck 5600SE and is the answer not in the manual?
General| Model | 5600SE |
|---|---|
| Type | Control Unit |
| Inlet/Outlet | 1" NPT |
| Cycle Settings | Adjustable |
| Brine Draw Flow Rate | 0.5 GPM |
| Bypass Valve | Optional |
| Max Temperature | 120°F |
| Service Flow Rate | 12 GPM |
| Brine Line Connection | 3/8" |
| Regeneration Type | Metered |
| Electrical | 120V/60Hz |
| Fast Rinse Flow Rate | 2 GPM |
| Power Supply | 24V AC/DC |
| Drain Line Connection | 1/2" |
Procedure for setting the current time of day on the control unit.
Steps to access and navigate the control programming menu.
Configure treated water capacity, regeneration time, and day override settings.
Instructions for initiating an unscheduled regeneration cycle.
Understanding the different displays during a regeneration cycle.
Manually stepping the valve through regeneration stages for testing.
Completing the setup by adding water, salt, and verifying operation.
Describes different modes for initiating regeneration cycles based on time or usage.
Explains control behavior during regeneration, programming, and power outages.
Diagram showing water flow through the valve in Service position with Yellow Cam.
Diagram showing water flow during Backwash (Step #1) with Yellow Cam.
Diagram illustrating water flow during Brine/Slow Rinse (Step #2) with Yellow Cam.
Diagram showing water flow during Rapid Rinse (Step #3) with Yellow Cam.
Diagram showing water flow during Brine Tank Fill (Step #4) with Yellow Cam.
Diagram showing water flow in Service position with Yellow Cam (repeat).
Diagram showing water flow through the valve in Service position with Red Cam.
Diagram showing water flow during Brine/Slow Rinse (Step #1) with Red Cam.
Diagram showing water flow during Backwash (Step #2) with Red Cam.
Diagram showing water flow during Rapid Rinse (Step #3) with Red Cam.
Diagram showing water flow during Brine Tank Fill (Step #4) with Red Cam.
Diagram showing water flow in Service position with Red Cam (repeat).
Labels and descriptions for components in the valve wiring diagram.
Exploded view of the control valve assembly with numbered parts.
Detailed list of parts for the control valve assembly, including item numbers and part numbers.
Exploded view of the valve powerhead assembly with numbered parts.
Detailed list of parts for the valve powerhead assembly.
Diagram of the 3/4" turbine meter assembly.
List of parts for the 3/4" turbine meter assembly.
Exploded view of the plastic by-pass valve assembly.
List of parts for the plastic by-pass valve assembly.
Exploded view of the brass by-pass valve assembly.
List of parts for the brass by-pass valve assembly.
Diagram of the 2300 Safety Brine Valve with numbered components.
List of parts for the 2300 Safety Brine Valve.
Exploded view of the 2310 Safety Brine Valve assembly.
List of parts for the 2310 Safety Brine Valve.
Steps for replacing the time brine valve, injectors, and screen.
Procedure for replacing the timer assembly on the control valve.
Instructions for removing and replacing the piston assembly.
Procedure for replacing seals and spacers in the valve.
Steps for removing and installing the meter module.
Instructions for replacing the meter cover and impeller.
Diagnosing and correcting issues when the softener fails to regenerate.
Identifying causes and solutions for hard water delivery.
Addressing problems related to excessive salt usage by the unit.
Diagnosing and fixing issues causing a loss of water pressure.
Identifying and resolving resin loss into the drain line.
Diagnosing and correcting iron in the conditioned water supply.
Identifying causes and solutions for too much water in the brine tank.
Addressing issues causing salt water to appear in the service line.
Diagnosing and correcting problems with brine draw.
Resolving issues where the control cycles continuously.
Diagnosing and correcting problems with continuous drain flow.
List of Backwash Flow Control (BLFC) assemblies and their specifications.
List of flow washer assemblies and their specifications.
List of brine valve assemblies and related parts.
List of by-pass valve assemblies (Brass and Plastic).
Details on the 5600SE piston assembly for upflow models.
Information on the 5600SE seal and spacer kit.
Details on the injector module assembly and its specifications.
To Next Page
