EasyManua.ls Logo

Fleetwood Bounder 2000 - Power Entry Step Operation and Safety

Fleetwood Bounder 2000
166 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
til/iNC;
WiTh
YOUR
MOTOR
HOME
The power entry step is controlled by the ignition switch and
by a switch near the entry door.
Power for the entry step is
supplied by the coach battery. The battery must be connected
for the step to operate as described below. The step has a
"last out" feature. With the door closed, the step power
switch
OFF, turn the ignition switch ON. The step will
retract. Turn
OFF the ignition, open the door and the step
will extend and lock in the
OUT position. The step also has
an
ignition override feature.
If
the door is closed (as though
ready to depart) with the step extended, the step will auto-
matically retract when the engine ignition is switched
ON.
This prevents driving with the step extended. The switches
operate the step according to the following table.
Ignition
Step Step
Switch Switch
Position!
Position Position
Action
OFF
ON
Step extends and retracts with the opening
and closing of the door.
OFF
OFF
Step
is
inactive. Will not move regardless of
door movement.
ON
ON
Step extends and retracts with opening and
closing of door.
ON
OFF Step extends and retracts with opening and
closing of door. If step
is
extended when
ignition is turned
ON, step will retract.
POWER
ENTRY
STEP
WARNING
Under certain conditions,
the step
may
not extend
using
the last-out feature.
Always
look and
be
sure
the step
is
extended
before
exiting
the
motor
home.
WARNING
If door
is
opened and
closed without allowing
the step
to
fully extend
and
lock
in
the
out
posi-
tion, the
step
will
retract
and
lock
in
the
up
posi-
tion.
BOUNdm
DiESEL

Table of Contents

Related product manuals