L;vi/vq
Whh
YOUR
MOTOR
HOME
To
convert the dinette into a bed:
1.
Unfasten and remove cushions.
2.
Reach under the table. Either remove leg or fold it
up
under
the
table top.
3.
Raise the front portion of table several inches to disengage
inserts from the
wall supports.
4.
Lower table top to the dinette frame to complete bed base.
5.
Slide seat and back cushion into place over bed base.
To
convert a sofa/lounge into a bed:
1.
Remove sofa bolsters.
2.
Lift front of sofa frame up and out.
3.
Push the back of the lounge back and down.
4.
Push the seat belts through the space between the lounge
back and seat.
To
restore the sofa/lounge:
1.
Pull the seat belts back up through the space.
2.
Lift the front edge of the sofa frame up, and push it back.
3.
The sofa back will come up.
4.
Push the sofa into position and replace sofa bolsters.
The dividers allow you to separate areas in the motor home.
They glide on nylon rollers. They are held closed by a catch.
When the dividers are open for traveling, be sure to attach
the catch
to
keep them from sliding back and forth.
04,6
DINETTE
CONVERSION
SOFA/LoUNGE
CONVERSION
DOORS/PRIVACY
DIVIDERS
BOUNdER
DiEsEl
To Next Page
Loading...
