ON
ThE
ROAd
If
your motor home is equipped with rear view video moni-
tor, the camera is located at the top rear
of
the motor home.
The rear view picture is displayed on a screen in the driver's
compartment. The monitor screen may be overlaid with a
distance scale reference which gives approximate distance
of
objects
to
the rear
of
the motor home.
To
operate
the video monitor:
1.
Turn on the ignition switch.
2. Shift the transmission to
R.
To override normal operation, the ignition switch must be on
and power must be on at the monitor.
Using the video monitor will take practice. Always allow
more space for maneuvering until you are comfortable with
the system. Check the side-mounted mirrors often while dri-
ving and especially during lane changes and when backing
up.
The camera lens is exposed
to
road dirt and will get dirty.
When necessary, clean the camera lens and monitor screen
with a quality glass cleaner and nonabrasive cloth or towel.
In keeping with good engineering practice, and to meet the
requirements
of
chassis manufacturers, certain chassis and
underbody components
of
your motor home have been coat-
ed with an undercoating material. This material is intended
to assist in protecting these components from corrosion or
other effects
of
weather and road conditions. Please be aware
that certain areas
of
the motor home do not have undercoat-
ing applied.
REAR
VIEW
VIDEO
MONITOR
CAUTION
The
rear view video mon-
itor system provides a
general view of the
road
and
objects
to
the rear of
the motor
home.
Your
per-
ception of this view
and
the relationships of
ob-
jects to the motor home
and
each other will
be
dif-
ferent
from
that
seen
in
a
rear view mirror. Light
conditions
and
the adjust-
ment of the screen con-
trols will also affect your
perception.
Always use
the side-mounted rear
view mirrors with the
video monitor system.
BODY
UNDERCOATING
PACE
ARRow
!
To Next Page
Loading...
Need help?
General
