Flex SMS 305 18-EC - Cutting Capacities

39
SMS 305 18-EC
Cutting capacities
Miter/Bevel Angle
Height Width
Horizontal Vertical
0° 0° mm
92
101
356
330
45°
(leftward/
rightward)
0° mm 92 252
0°
45°
(rightward)
mm 38 356
0°
45°
(leftward)
mm 60 356
45°
45°
(rightward)
mm 38 252
45°
45°
(leftward)
mm 60 252
Overview (Figure A)
The numbering of the product features refers
to the illustration of the machine on the
graphics page.
1. Main handle
2. Lock-off lever
3. Main switch
4. Slide-rail lock knob
5. Arm-lock pin
6. Sliding fence
7. Table extension
8. Table extension lock lever
9. Nail hole
10. Bolt hole
11. Miter scale plate
12. Table
13. Miter-angle indicator
14. Bevel lock lever
15. Miter detent release lever
16. Miter locking knob
17. Kerf insert
18. Slide rail
19. Lower blade guard
20. Upper blade guard
21. Spindle lock
22. Depth stop plate
23. Depth stop bolt
24. Sliding fence lock knob
25. Work clamp mounting hole
26. Work clamp locking knob
27. Hex wrench storage
28. Bevel scale plate
29. Bevel-angle indicator
30. Dust port
31. LED shadow light switch
32. LED shadow light indicator
33. Speed control button
34. Speed control indicator
35. Work clamp
36. Dust bag
37. Vacuum adapter
38. Double-ended Allen wrench
39. Dust tube
40. Carrying handle
Assembly
WARNING!
Remove the battery before carrying out any
work on the power tool.
Before switching on the power
tool
Unpack the cordless miter saw and check that
there are no missing or damaged parts.
Unpacking and checking contents
WARNING!
If any parts are missing, do not turn the switch
on until the missing parts are obtained and
are installed correctly.
Unpack the miter saw and check if all parts
listed below:
󰀲
Miter saw
󰀲
Work clamp
󰀲
Dust bag
󰀲
Vacuum adapter
󰀲
Double-ended Allen wrench
󰀲
Dust tube
Tools needed (not supplied)
󰀲
Combination square