Flexcom Communication Ltd Installation and operating instructions (2021/06/09)
20/26
Restart the device
Restart the GPS and GSM
modules of the device. rst
Restart
Ok
Factory default
setting
Reset the device to factory
settings. format
-
Query the position of the device
Description Device response
Call the phone number of the device's SIM card
from your phone. After receiving the call, the
device cancels it and then sends the data back in
an SMS message: latitude and longitude, current
speed, time and link, which, when clicked /
tapped, will display the device's indicator on the
Google map in our phone's browser.
If the device cannot connect to GPS satellites (eg
inside a building or in another shaded area), use
the cell information of the GSM transmission
towers to determine its position (LBS, Location
Based Service). Its accuracy depends largely on
the distance from the towers and the mobile
network coverage.
If you have not previously set up an administrator
phone number, the machine can be called from
any location - otherwise it will only answer calls
from the administrator number.
Device information
Interception of the environment (sound monitoring)
After switching on, it becomes possible to „listen” to the sounds and noises in the vicinity of the
device. In eavesdropping mode, position transmission is paused, so we cannot track the device during
this period.
Function Description SMS message
Device
response
Activate monitoring
mode
Turn on recording. The
trace is then paused and
the device is switched on
for approx. Records
sounds that can be heard
within 5 meters. After
activation, you need to call
the phone number of your
device to listen to it.
monitor123456
Turn off monitoring
mode
Turn off recording, return
to tracking mode. tracker123456
Flexcom
To Next Page
Loading...