Flexcom LK209A - Device Operation Modes; Powering On and Off; Operating Time and Standby; Device Operation Methods

Flexcom Communication Ltd Installation and operating instructions (2021/06/09)
15/26
After turning on and positioning the device, the removal sensor button is pressed and activated after
15 seconds. If the device is then removed or dropped, an SMS message will be sent to the admin
phone.
Switching on and off
You can activate or deactivate the device with the on / off button. When switched on, the device
automatically searches for connections to the GSM / GPRS network and GPS satellites. The LED
display informs about the process and the result.
Operating time
The device battery provides 90 days of standby time and several weeks to months of continuous
operation, depending on the intensity of use.
Normal operation of the device
The device can be operated in the following ways:
using the software service provided by the distributor and the SIM card together, in addition to1.
the software service provided by the distributor but using his own SIM card, or
without the service provider's software service, with your own SIM card.2.
The service provider provides a SIM card for the tracking device only if you subscribe to
the software service. In the case of unsolicited use of the software, the user must provide
the appropriate card with a data traffic limit (also).
With Distributor Software and SIM Card
In this case, you can receive the device in the ready state, no further settings are required to use it.
Separate software is available for setting or adjusting the operating parameters of the device, for
retrieving information or for using more advanced services (eg map route display, waiting and travel
points, diagrams, timetable, etc.). This is provided by the distributor in the form of a downloadable
application on a desktop and tablet browser on an Android mobile phone as part of a subscription
system.
To use the software, an active internet connection is required on your device (mobile
phone, computer).
The software stores and processes the data sent by the tracking device to the service provider's
center, from which the graphical and textual information is generated. Using the software triggers
(sometimes very expensive) SMS and voice call communication with the device and provides tracking
and security services that go well beyond the basic functions of the device.
Flexcom