Waste disposal
This marking indicates that this product should not be disposed with other household
wastes. To prevent possible harm to the environment or human health from
uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse
of material resources. To return your used device, please use the return and collection
systems or contact the retailer where the product was purchased. They can take this
product for environmental safe recycling.
Anti-collision sensitivity adjustment - optional features:
1.Simultaneously press and hold the "▲" and "▼" buttons for three seconds to switch the
sensitivity, one operation to switch one level, divided into 4 levels, A-0, A-1, A-2, A-3
2.The display shows " " means the anti-collision function is closed; the display shows
" " means high sensitivity; the display shows " " means medium sensitivity; the display
shows " " means low sensitivity. (Factory default A-2)
3.When the desk go up or down, it will rebound immediately when encountering obstacles
to prevent itself.
●
Code processing:
1.Reset function definition: When the LED display shows " "or " ", press and hold
the “▼” button to start the reset. When the desktop drops to the lowest height, it starts to
rebound and run upwards. The reset is completed, until the display shows "bot".
2.If "E01" or "E02" appears, please let the desk rest for more than 18 minutes before it can
be used normally.
3.If other codes appear and holding the "▼" button for a long time does not get any respond,
please confirm that the connection line is not damaged and the connection is normal. Cut the
power for more than 10 seconds, then turn on the power again, when the display shows
" "or " ", press and hold the "▼ "Button to reset.
4.The desk still does not operate normally after performing above operations, please contact
customer service.
●
To Previous Page
Loading...
