–9–
5. MENU Button
Press the MENU button. The MENU display appears.
Use s and t buttons to select desired function, then press ENTER button to end the choice.
6. TV/VIDEO Button
Press this button to access the AUDIO/VIDEO input jacks, on the front and rear of the TV. As the
button is pressed, the on-screen display will cycle as follows:
7. MUTE Button
Press this button to turn the TV sound off. Press again to restore sound to the previously set level.
MUTE may also be released by pressing the VOLUME +/– buttons.
8. ERASE/ADD Button
This button is used to manually add or erase any channel that is stored in the CHANNEL s/t
memory. The stored channel numbers are displayed in GREEN on the screen and the non-stored
channel numbers are in RED.
9. TV/CATV Button
Use this button to select regular 69-channel broadcast TV or 125-channel cable TV (standard
cable, HRC cable, or IRC cable).
As the button is pressed, the on-screen display will cycle as follows:
TV VIDEO 1 VIDEO 2 VIDEO 3
AIR CABLE-S CABLE-H CABLE-I
REVISED DATE : 07/04/03
– DRAWING CHANGE
*
*
To Next Page
Loading...
Need help?
General