–17–
CABLE TV TUNING PROCEDURE
1. Connect the CATV cable directly to the TV antenna terminal. Your local cable system operator's
converter box should not be required unless certain premium channels are scrambled.
2. Select the appropriate CATV setting with the TV/CATV button on the remote control.
3. You can now select CATV programs by using the CHANNEL s/t buttons or the number buttons on
the remote control. The chart below lists the total channel and cable count.
Channels Off Air Cable
Low VHF (Channel 01) – 1
VHF (Channels 2 ~ 13)* 12* 12*
UHF (Channels 14 ~ 69)* 56 –
Low Midband A–5 ~ A–1 (Channels 95 ~ 99) – 5
Midband (Channels 14 ~ 22 or A ~ I) – 9
Superband (Channels 23 ~ 36 or J ~ W) – 14
Ultraband (37 ~ 94 and 100 ~ 125 or w+29 ~ w+48) – 84
Total* 68 125
To Next Page
Loading...