Aircraft Type: CTSW
FLIGHT DESIGN
Aircraft Operating Instructions
Page: 8-3
AU 010 01000
Rev. No: 7
Original Issue Date: 28-Feb-2005
Revision Date: 29-Apr-2008
8.2
Engine start
1. Preflight Complete
2. Parking Brake Set
3. Carburetor heat Off
4. Circuit breakers In
5. Radios and Electrical equipment Off
6. Master Switch On
7. Anti-collision lights On
8. Fuel Valve Open
9. Ignition key In
10. Choke As required
11. Throttle Closed
12. Ignition Switch Start and release
13. Choke Adjust
14. Oil pressure Check
15. Radios Set
16. Flaps Up
8.3 Taxiing
1. Brakes and Steering Check
Before takeoff
1. Parking Brake Set
2. Seat belts Secure
3. Doors Closed
4. Flight Controls Free and correct
5. Flight Instruments Set
6. Choke Off
7. Carburetor heat Off
8. Throttle 3200 RPM
9. Engine Indications Check
10. Ignition Check Left, Right, & Both
(max. drop 300 RPM/max diff. 120 RPM)
11. Oil temperature Min 51°C / 124°F
12. Throttle Idle
13. Flaps Set for takeoff
14. Trim Set for takeoff
15. Radios Set
16. Parking Brake Release
To Next Page
Loading...
