IRCamSafeEX-AXB/C Ex d enclosures for infrared cameras
8
8.2 General safety instructions
The operating instructions contain important safety instructions that must be observed
when carrying out assembly, operation and maintenance work. Failure to observe the
safety instructions may endanger people, the plant, and the environment.
Hazard caused by unauthorized work on the device
Assembly, installation, commissioning, operation, and maintenance work may on-
ly be performed by personnel who are authorized and trained to do so.
Before assembly/commissioning:
• Read the operating instructions.
• Ensure that assembly and operating personnel are provided with adequate training.
• Ensure that the personnel in charge fully understand the contents of the operating
instructions.
• National assembly and installation regulations apply (e.g. IEC/EN 60079-14).
If anything is unclear:
• Contact the manufacturer.
When operating the devices:
• Ensure that the operating instructions are available at the site of operation at all times.
• Observe the safety instructions.
• Observe national safety and accident prevention regulations.
• Only operate the device according to its performance data.
• Maintenance work or repairs that are not described in the operating instructions must
not be performed without the manufacturer’s prior consent.
• Any damage to the device may nullify the explosion protection.
• Any additions or modifications to the device that impair the explosion protection are
prohibited.
• Only install and operate the device if it is dry, clean, and in perfect condition.
8.3 Use and intended area of application
The protective enclosures are certificated for use with infrared cameras in potentially ex-
plosive atmospheres categorized as zones 1 and 2. The AXC enclosure model can also
be used in potentially explosive atmospheres categorized as zones 21 and 22.
Only use the device in line with its intended use
Failure to use the device in line with its intended use will render the manufac-
turer’s liability and warranty void.
Only use the device in line with the operating conditions stipulated in these oper-
ating instructions.
#T559891; r.18204/18204; en-US
9
To Next Page
Loading...
