Mouse Control
6
The NVR is designed for mouse navigation. Connect the included mouse to one of the
USB ports on the NVR.
To use the USB mouse:
1. Left Button:
• During split-screen display mode, click an individual channel to view it in full-screen.
Click again to return to the split-screen display mode.
• While navigating menus, click to open a menu option.
2. Right Button:
• During Live View, right-click anywhere on the screen to open the Quick Menu.
• Within system menus, right-click to exit menus.
3. Scroll wheel:
• During Live View, use the scroll wheel to zoom in / out.
NOTE
In Live View, hover the mouse cursor over the bottom of the screen to open the Navigation Bar. Move the
mouse cursor away from the bottom of the screen to close the Navigation Bar.
#LX400094; r.43927/43955; en-US
15
To Next Page
Loading...