Using the NVR On-Screen Display
7
6. Sequence: Click to start or stop Sequence Mode, which cycles through connected
cameras automatically during Live View.
A
will appear to show that sequence mode is on. Click the icon to pause sequence
mode on the channel that is currently shown (icon changes to
). Click again to re-
sume sequence mode. Right-click and select Sequence to return to normal viewing
mode.
7. Disable Beep: Disable current audible warning.
8. Playback: Opens the Playback Menu. This allows you to search for video recordings
saved on the NVR’s hard drive. For details, see 10 Playback, page 31.
9. Manual Control: Under Manual Control, click Record to open the Record menu to
select manual recording options. For details, see 9.3 Setting up Scheduled or Manual
Recording, page 28.
10. Device Search: Opens the Remote Device menu to manage network cameras over
the local network.
11. Main Menu: Opens the Main Menu. For details, see 13 Using the Main Menu, page
50.
7.2 Adjusting Camera Image Settings
Use the Camera Setting menu to adjust settings related to camera picture quality.
To adjust camera image settings:
1. During Live View, right-click on the channel you would like to configure and select
Camera Setting. If prompted, enter the user name (default: admin) and your secure
password.
#LX400094; r.43927/43955; en-US
17
To Next Page
Loading...