Operation
7
7.8 Palettes
7.8.1 General
The FLIR ONE app allows a choice from nine different palettes, including color, gray-
scale, or a combination of both.
7.8.2 Change settings
Follow this procedure:
1. In the bottom bar, tap the Imaging Control.
2. Tap the Palettes icon.
3. Select one of the available color palettes.
7.9 MSX Distance
7.9.1 General
The FLIR ONE camera is tuned to align thermal and visual images for an object distance
of 3 m. For images taken at a shorter distance, use the MSX Distance control slider to
adjust the alignment.
7.9.2 Change settings
Follow this procedure:
1. In the bottom bar, tap the Imaging Control.
2. Tap the MSX Distance icon.
3. Use the slider bar to adjust the outlines of the visual image until they are aligned with
the edges of the thermal image.
4. To exit, tap the MSX Distance icon again.
7.10 Temperature Range
7.10.1 General
All of the cameras in the FLIR ONE series can measure temperatures between –20°C
and +120°C (–4 to +248°F).
The FLIR ONE PRO camera has an extended temperature range, and can measure up
to +400°C (+752°F). High temperature is the standard mode.
7.10.2 Change settings
Follow this procedure:
1. In the bottom bar, tap the Imaging Control.
2. Tap the Temperature Range mode icon.
3. Select the Low temperature option, and then use the spot meters as you would in the
standard mode.
7.11 IR Scale
7.11.1 General
The FLIR ONE camera will show you the temperature range of the current scene, and will
readjust the range automatically when the scene changes. By using the feature IR Scale,
it is possible to manually set the temperature range and consequently permit adjustment
of the color mapping.
#T810375; r. AA/51295/51295; en-US
12
To Next Page
Loading...
Need help?
General
