TM
USER GUIDE 11
TROUBLESHOOTING
FLIR ONE NOT DETECTED
If the FLIR ONE app is not able to detect the FLIR ONE camera,
make sure the iPhone is properly attached to the FLIR ONE and
fully engaged. Make sure the FLIR ONE is turned on with the power
switch. When the FLIR ONE is turned on, the power indicator should
be ashing green. Make sure the FLIR ONE is adequately charged up
(when the device is plugged into a power source, the charge indicator
on the side of the device near the micro USB connection will stay lit
continuously if the device is fully charged).
TEMPERATURE READINGS NOT ACCURATE
The temperature indicated by the FLIR ONE is always a calculated
estimate and never exact. The indicated temperature is aected by
many factors, especially the emissivity of the object being observed
and the distance to the object. The temperature may be inuenced by
the time of day, by weather conditions, or by other hot or cold objects
in the vicinity that may be reecting o the intended object.
AUTOMATIC CALIBRATION
If Automatic Calibration is disabled, it may be necessary to manually
perform a calibration operation on the FLIR ONE. This allows the
thermal imager to present an optimized image and a more accurate
temperature calculation (see Automatic Calibration on page 7 for more
information).
To Next Page
Loading...
Need help?
General
