FLIR ONE - Page 9

TM
USER GUIDE 9
ANDROID SPACER
Included with your FLIR ONE are two spacer attachments that can be
used to create a snug t and nish for users who do not have a case on
their phone.
To assemble, remove the protective lm revealing the adhesive on the
underside of the spacer. Line up the straight edge of the spacer with
the straight edge of your FLIR ONE. Once lined up properly, apply light
pressure to ensure a complete seal.
Note: Once the spaced is attached, your FLIR ONE will no longer t
inside the supplied bumper.
SPACER OPTIONS
There are two dierent spacer options depending on the phone model.
The spacer with the U-shaped divot in the top should only be used
for the Samsung Galaxy s5. All other Android models should use the
spacer with the smooth top.
SAMSUNG GALAXY S5
ALL OTHER ANDROID MODELS