910-0001-00-INS -R02 Page 7 of 53
Information contained in this document pertains to a Canadian origin product that is controlled as "dual use" by the Canadian
government. However, when in the United States or possessed by a US person, it may be considered a defense article from the US Government's
perspective. US government authorization may be required for re-transfer to a foreign person. If you have any questions, please contact FLIR's
Global Trade Compliance group at exportquestions@flir.com .
TABLE OF CONTENTS
1 INTRODUCTION ........................................................................................ 10
1.1
EQUIPMENT FEATURES AND SPECIFICATIONS ..................................................... 10
1.2
SAFETY ISSUES ......................................................................................... 12
1.3
UNPACKING THE R1, R2, R3, R3D, R5 and R5D RADAR ASSEMBLY ............................. 12
2 HARDWARE SYSTEM DESCRIPTION.................................................................. 13
2.1
HARDWARE COMPONENT DESCRIPTION ............................................................ 13
2.2
PHYSICAL SYSTEM OVERVIEW ........................................................................ 13
3 PLANNING SYSTEM INSTALLATION ................................................................. 15
3.1
RADAR ASSEMBLY INSTALLATION ................................................................... 15
3.2
POWER DISTRIBUTION NETWORK ................................................................... 23
4 HARDWARE INSTALLATION .......................................................................... 23
4.1
RADAR ASSEMBLY INSTALLATION ................................................................... 23
4.2
ANTENNA TILT ADJUSTMENT ........................................................................ 29
4.3
RADAR POWER DISTRIBUTION NETWORK INSTALLATION ........................................ 35
4.4
NETWORK INFRASTRUCTURE INSTALLATION ...................................................... 36
5 RADAR TRANSMISSION CONFIGURATION .......................................................... 37
5.1
CONFIGURING THE RADAR TARGET AZIMUTH UPDATE .......................................... 37
5.2
CONFIGURING THE CHIRP SLOTS.................................................................... 38
5.3
CONFIGURING TRANSMISSION SECTORS............................................................ 43
6 TROUBLESHOOTING ................................................................................... 45
7 MAINTENANCE ......................................................................................... 47
7.1
VISUAL INSPECTION ................................................................................... 47
7.2
RECOMMENDED MAINTENANCE SCHEDULE ........................................................ 47
7.3
CLEANING THE UNIT .................................................................................. 48
7.4
EXTERNAL MECHANICAL INSPECTION .............................................................. 48
7.5
REMOVING THE RADOME ............................................................................. 48
7.6
REPLACING THE RADOME............................................................................. 49
7.7
INTERNAL MECHANICAL INSPECTION ............................................................... 49
7.8
REPLACING THE MEMBRANE GORE VENT .......................................................... 51
To Next Page
Loading...
Need help?
General
