FLIR T420 - Setting up Above, Below, and Interval Alarms

Working with color alarms and isotherms18
Color alarm
Image
Interval alarm
Condensation alarm
Insulation alarm
18.2 Setting up above, below, and interval alarms
Follow this procedure:
1. Push the joystick to display the menu system.
2. Use the joystick to go to
(Color).
3. Push the joystick to display a submenu. Use the joystick to select the type of alarm:
•
(Above alarm)
•
(Below alarm)
•
(Interval alarm)
4. Push the joystick. The threshold temperature is displayed at the bottom of the screen.
#T559879; r. AO/35410/35410; en-US
54