Need help?Do you have a question about the FLIR TG56 and is the answer not in the manual?
General| Brand | FLIR |
|---|---|
| Model | TG56 |
| Category | Thermometer |
| Language | English |
Legal notice regarding the reproduction and translation of software and documentation.
Information on the product's ISO 9001 certification and commitment to continuous development.
Instructions on how to access the latest manuals and notifications from FLIR's website.
Guidelines for environmentally friendly disposal of electronic products according to regulations.
Explanation of symbols indicating the need to refer to the manual for further information.
Warnings about improper use, laser pointer safety, and referencing specifications.
Overview of the TG Series IR thermometers' main functionalities and design aspects.
Identification and description of controls and components on the rear of the device.
Identification and description of components on the front of the device.
Identification and description of components located on the top of the device.
Detailed explanation of the main display screen elements for TG54 and TG56 models.
Table explaining the meaning and function of various icons displayed on the device screen.
Explanation of the function and operation of the device's control buttons and trigger.
Instructions on how to turn the device on, battery information, and battery status indicators.
Step-by-step guide on how to perform temperature measurements using the IR thermometer.
Explanation of the D:S ratio for TG54 and TG56 models and its implications for measurement.
How to set and utilize high and low alarm thresholds for temperature alerts.
Description of the three available display modes: MIN-MAX, Average/Delta, and Three-reading.
Instructions for connecting and using the Type K thermocouple with the TG56 model.
Introduction to the programming menu and its capabilities for configuring the device settings.
Step-by-step guide on how to navigate and edit settings within the programming menu.
How to select and configure the desired display mode for temperature readings.
Instructions for adjusting the emissivity setting for accurate temperature measurements.
Guide to setting up and configuring high, low, or combination temperature alarms.
How to enable or disable the laser pointer function for targeting.
Instructions for changing the displayed temperature units between Celsius and Fahrenheit.
How to configure the automatic power-off timer to conserve battery life.
Accessing FLIR contact information and other useful data via the help screen.
Accessing firmware version, calibration date, and laser information from the info screen.
Step-by-step instructions for replacing the device's batteries.
Information on factory calibration and procedures for recalibration if required.
Guidelines for cleaning the device housing, lenses, and display window.
Overview of general technical specifications including display, battery, and accessories.
Details on operating and storage temperature, and relative humidity limits.
Specific technical details for the IR thermometer functionality.
Technical details related to the device's laser pointer.
Technical details for the Type K thermocouple input and measurements.
A table listing emissivity values for various common materials.
Explanation of the principles of infrared energy and how IR thermometers operate.
Contact information and resources for technical support, service, and repair.
Details of the limited warranty terms, conditions, registration, and exclusions.
To Next Page
