Need help?Do you have a question about the FLIR TG54-2 and is the answer not in the manual?
General| Resolution | 0.1°C / 0.1°F |
|---|---|
| Distance to Spot Ratio | 24:1 |
| Spectral Range | 8–14 µm |
| Operating Temperature | 0 to 50°C (32 to 122°F) |
| Laser Pointer | Single laser |
Provides essential safety information, including laser pointer caution and warnings for thermocouple usage with the TG56-2.
Details the actions associated with each button (MODE, LOG, arrow buttons) in different operating modes.
Explains how to perform continuous temperature measurements by holding the trigger and targeting surfaces.
Describes how readings are held on the display after the trigger is released, for a set duration.
Details the hands-free scanning feature, allowing timed continuous measurements without holding the trigger.
Covers how to adjust emissivity settings for accurate IR temperature measurements based on surface properties.
Explains how to use a Type K thermocouple for contact temperature measurements with the TG56-2 model.
Details how to configure high and low temperature alarm set points and select presets.
Explains how to set and select up to five custom emissivity values for quick adjustments.
Details the configuration of the automatic data logger, including start time, interval, and number of readings.
To Next Page
