Product Description
5
5.2 Control Buttons
Figure 5.2 Control Buttons
The control buttons are only active when the display is switched on. Pull and
release the trigger to switch on the display.
Table 5.1, below, lists the buttons in the left column, the action for each button
in the centre column, and the mode where the action is possible in the right-
most column.
Table 5.1 Control button actions.
BUTTON ACTION MODE
Short press to step through the MAX, MIN, AVG, DIF
memories (Section 7.4).
SCAN and
HOLD
Long press to open the programming menu (Section 9).
When in the programming menu, short press to step
through the menu options.
HOLD
Press an arrow button to access the data log recall
mode. In the recall mode, use the arrows to scroll
through logged readings. There are 99 memory loca-
tions (Section 10).
HOLD
In the programming menu, use the arrows to change
settings (Section 9).
MENU
#NAS100131; r. AC/92852/92852; en-US
7
To Next Page
Loading...
