Programming Menu
9
To access this setting with the meter off, pull and release the trigger to enter
the HOLD mode, long press the MODE button to enter the program menu,
and then press the MODE button four times.
9.7 Setting the Laser Pointer ON-OFF
If you are continuing from the previous menu, use the arrow buttons to set the
Laser ON or OFF. If you select ON, the laser will switch on each time you pull
the trigger. If you set it to OFF, the laser will be disabled.
To access this setting with the meter off, pull and release the trigger to enter
the HOLD mode, long press the MODE button to enter the program menu,
and then press the MODE button five times. Now use the arrows to set the la-
ser ON or OFF.
Figure 9.5 Enabling and disabling the laser pointer.
To save the setting and return to the normal operation mode, pull and release
the trigger. Otherwise press the MODE button to move to the Date/Time
parameter.
9.8 Setting the Date and Time
If you are continuing from the previous menu, use the arrow buttons to first se-
lect the 12 or 24 hour clock mode and then to set the calender clock. Use the
LOG button to move from field to field.
To access this setting with the meter off, pull and release the trigger to enter
the HOLD mode, long press the MODE button to enter the program menu,
and then press the MODE button six times. Now use the arrows to set the 12/
24 clock mode, date, and time. Use the LOG button to move from field to field.
#NAS100131; r. AC/92852/92852; en-US
20
To Next Page
Loading...
