ExplanationValueLabel
If the camera is switched on but currently not used,
it will automatically be switched off after a specified
time.
Set the time by pressing the navigation pad
left/right.
■
None
■
2 min
■
5 min
■
10 min
Auto power off
If the camera is switched on but currently not used,
the display will automatically be switched off after
a specified time.
Set the time by pressing the navigation pad
left/right.
■
None
■
30 sec.
■
60 sec.
■
2 min.
Display power off
➲ For protective reasons, the LCD will be switched off if the detector temperature
exceeds +60 °C (+149 °F) and the camera will be switched off if the detector temper-
ature exceeds +68 °C (+154.4 °F)
10.4.9.2 Date/time
10382103;a3
Figure 10.17 Date/time dialog box
Figure 10.18 Explanations of the Date/time dialog box
ExplanationLabel
1970–2036Year
1–12Month
1–31Day
■
12 a.m.–12 p.m.
■
1–24
The format depends on the settings in the Local Settings dialog
box.
Hour
00–59Minute
00–59Second
10
70 Publ. No. 1558439 Rev. a156 – ENGLISH (EN) – February 28, 2006
10 – Camera program
To Next Page
Loading...
