1 Remove Flitecell from its travel bag.
2 Place Flitecell in a cool dry location away from flammable or hot
items. Safe charging temperatures are 0 - 40°C and optimal charging
temperatures are 10 - 30°C.
3 Connect Flitecell charger plugs to Flitecell terminals ensuring to
connect the orange (positive) connector to the orange terminal first
and the black (negative) connector to the black terminal.
4 Check that connections have been made correctly. Plug the charger
in the wall socket. Place the supplied magnet on the Flitecell for 5 -
10 seconds, as shown by arrow, to activate charging. If the magnet
has been misplaced, you can use the base of Flite Controller to
initiate charging.
5 The charger will automatically turn o when the charging process
is complete.
FLITECELL IS A POWERFUL BATTERY CONTAINING A SIGNIFICANT AMOUNT
OF ENERGY. CHARGING A DAMAGED FLITECELL CAN RESULT IN A FIRE OR
EXPLOSION. ALWAYS INSPECT THE FLITECELL BEFORE CHARGING.
CHARGE THE FLITECELL UNDER SUPERVISION, IN A SAFE LOCATION,
AWAY FROM DIRECT SUNLIGHT, MOISTURE AND AWAY FROM FLAMMABLE
OBJECTS AND SURFACES.
THE BATTERY MANAGEMENT SYSTEM (BMS) BALANCES AND OPTIMISES
FLITECELL DURING EACH CHARGE CYCLE.
IT IS RECOMMENDED TO DISCONNECT THE FLITECELL AFTER A FULL
CHARGING CYCLE.
Red light flashes Capacity 0% – 10%
Red light on Capacity 10% – 20%
Green light on Capacity is 20% – 35%
Green light flashing Capacity 20% – 35% + charging
Two green lights on Capacity 35% – 65%
One on + one flashes Capacity 35% – 65% + charging
Three green lights on Capacity 65% – 100%
Two on + one flashes Capacity 65% – 100% + charging
Flitecell light Light meaning
MAGNET
PLACED
TO ACTIVATE
CHARGING
Charging Flitecell
19
To Next Page
Loading...