Connecting Flite App to Flitescooter
1 Turn o Flite Controller.
2 Ensure Flitescooter has power and the lid is closed.
3 Select ‘Flitescooter’ from the ’Devices’ menu. When connected, the
board Flitebox LED will turn purple. When performing some updates
it will display green.
4 You will now be able to see the software version of Flitescooter.
5 Once connected you can perform updates and sync session rides.
6 Connecting to Flitescooter will transfer settings from the app
(e.g. knots and miles per hour).
WHEN NEW SOFTWARE UPDATES ARE AVAILABLE, YOU’LL SEE AN
ORANGE UPDATE ICON.
BEFORE YOU UPDATE SOFTWARE MAKE SURE THE PHONE, FLITECELL
AND FLITE CONTROLLER HAVE AT LEAST 20% CHARGE.
KEEP THE PHONE CLOSE AND IN LINE OF SIGHT WITH A STRONG WIFI/
CELLULAR NETWORK. DON’T USE THE PHONE FOR ANYTHING ELSE
SUCH AS CALLS, TEXTS, OR OTHER APPS.
MAKE SURE THE FLITESCOOTER LID REMAINS CLOSED DURING THE
UPDATE PROCESS.
ENSURE FLITE CONTROLLER IS TURNED OFF AS THE APP CAN ONLY
CONNECT TO ONE DEVICE AT A TIME.
30
To Next Page
Loading...