Motor Cool Down
The motor needs to cool
down. Flitescooter is
limited to low gears for
1 minute to allow motor
to cool.
High Temp
Flitecell is too hot.
Ride using low power
to allow Flitecell to cool,
otherwise Flitecell may
shut down.
Flitecell charge critical
Flitecell charge very low,
immediately return to
shore. Flitescooter is limited
to low gears only to
conserve charge.
Flite Controller low
charge
Flite Controller requires
charge. Ensure Flite
Controller is charged
above 50% each ride.
Settings
Flitescooter settings can be updated on the Flite App or the Flite
Controller.
To change settings on the Flite Controller, hold the Mode button
until the settings screen is displayed.
CONNECTING TO FLITESCOOTER WILL TRANSFER SETTINGS FROM
THE APP (E.G. KNOTS AND MILES PER HOUR).
PLEASE BE AWARE THAT SPEED READOUT REQUIRES A GPS
CONNECTION. IF YOU ARE RIDING WITH POOR GPS SIGNAL YOU
MAY NOT BE ABLE TO SEE YOUR CURRENT SPEED.
37
To Next Page
Loading...