Floe VSD6000 - Assembly Instruction Manual

SHEET 1 OF 12
FLOE PONTOON GUIDE-IN/BUNK
VSD6000-8000 PONTOON
ASSEMBLY INSTRUCTIONS
KIT P/N 511-02484-00, 511-02485-00, 511-02486-00
INSTRUCTION P/N: 611
-
0248
5
-
00
RELEASED 8/9/19
© Manufactured by:
Floe International Inc.
48473 State Hwy. 65
McGregor, MN 55760
www.floeintl.com
*LIFT NOT INCLUDED
BUNK/CRADLE PAD DISCLAIMER
DUE TO THE LARGE VARIETY OF BOAT HULL DESIGNS, WE STRONGLY
RECOMMEND THAT YOU CONSULT WITH YOUR BOAT’S MANUFACTURER TO
ENSURE THAT YOUR ARE SUPPORTING YOUR BOAT PROPERLY TO AVOID ANY
POTENTIAL DAMAGE.
TOOLS REQUIRED
-(2) 9/16” SOCKET/WRENCH
-15/16” SOCKET/WRENCH
-TAPE MEASURE
-TORQUE WRENCH
-RECIPROCATING SAW OR
EQUIVALENT WITH METAL
BLADE (OPTIONAL, SEE SHEET
4 & 7)