Flow ESL INTENSIFIER - ESL Intensifier Description; Specifications; Hydraulic Oil; Operating Principles

ESL intensifier description
The ESL intensifier is available in 60,000 psi (4138 bar)
and 40,000 psi (2759 bar) output water pressure
ratings.
Specifications
Diameter .........................................7 in. (178 mm)
Length ............................................32 in. (809 mm)
Weight ..............................................105 lb (48 kg)
Type of shift..................................................electric
Output pressures.......................60K/20:1, 40K/20:1
Hydraulic oil
kinematic viscosity.............310 SSU @ 100°F (38°C)
Hydraulic oil
Oil must be ISO viscosity grade 46. The following oils
are recommended, but other manufacturer's equiva-
lents can be used.
•
Mobil DTE Medium or DTE 25
•
Shell Turbo T 46
• Chevron Turbine Oil GST 46
•
Texaco Regal R&O 46
Operating principles
The intensifier pump consists of a hydraulic system, a
high-pressure water delivery system, and a control sys
-
tem. Details of the control, hydraulic oil, and high-
pressure water systems can be found in the following
manuals:
•
Intensifier pump manual or the intensifier pump
chapter of an IFB or WMC system manual
•
MS-2275, Ultrahigh-Pressure Pump Operating
Principles
© Flow International Corporation M-310 | 5
ESL Intensifier