Flowserve Argus EK Series User Manual

Argus Ball Valve EK, FK and HK Operating Manual – BA1000 EN
5 Installation
Page 33 of 67
5.3 Installing the Argus Ball Valve via a Flange Connection
1. Transport the Argus Ball Valve to the installation site using lifting devices suitable
for the weight and the size of the Argus Ball Valve
(see Chapter 12 Transportation).
2. Remove the protective caps.
3. Clean the piping ends, flange connections and sealing surfaces.

Flowserve Argus EK Series Specifications

General

Brand	Flowserve
Model	Argus EK Series
Category	Control Unit
Language	English