FlowAct Diaphragm Linear Actuator FCD VLENIMFACTA4 10/16
75
flowserve.com
18 Disposal
Up to 95 % of the FlowAct pneumatic actuator is metal. The
remaining materials are synthetic, rubber, polycarbonate
(PC), silicone, paint and lubricants.
NOTICE
Potential hazards and their sources are
under the operator‘s influence. The opera-
tor must observe national and international environmental
conditions for rotary actuator removal from the pipeline and
cleaning. Permissible limit values must be maintained to en-
sure suitable protective measures; service personnel must be
properly instructed in performing the disassembly and reas-
sembly procedure.
The valve should be professionally disassembled and reas-
sembled. Metal parts should be scrapped, with the remaining
materials disposed of according the national conditions.
Peripheral units (accessories) should be recycled according
the relevant manufacturer‘s User Instructions.
To Next Page
Loading...
Need help?
General
