Need help?Do you have a question about the Flowserve Limitorque LTQ008 and is the answer not in the manual?
General| Model | LTQ008 |
|---|---|
| Category | Controller |
| Torque Rating | 800 in-lbs |
| Power Supply | AC or DC |
| Voltage | 24 VDC (typical, check specific model) |
| Communication Protocol | HART |
| Enclosure Rating | NEMA 4X |
| Control | Local/Remote |
Defines the coverage and purpose of this user instruction manual.
Outlines limitations, warranty conditions, and advice regarding product use.
Explains basic principles of actuator operation and initial setup.
Details hazard symbols used in the manual and their meanings.
Specifies the approved applications and parameters for the product.
Identifies potential risks associated with the product during operation.
Highlights dangers and precautions related to electrical shock and wiring.
Defines requirements for personnel involved in operation and maintenance.
Provides an overview of the LTQ008-230 Series actuators and their features.
Describes the Local Control Station (LCS) and its Type LL features.
Guides the user through the steps for installing the actuator correctly.
Provides essential instructions for securely mounting the actuator.
Explains the theory of operation for NCU models with On/Off control.
Details the theory of operation for BIC models with On/Off control.
Details the theory of operation for BIC models with proportional control.
Explains BIC + LL models with On/Off control theory.
Explains BIC + LL models with proportional control theory.
Describes the function and purpose of torque switches for protection.
Explains the operational modes and functions of the LL Series LCS.
Introduces the process and importance of actuator adjustments.
Provides detailed steps for setting the Clockwise end-of-travel position.
Provides detailed steps for setting the Counterclockwise end-of-travel position.
Guides on setting auxiliary switches for warning or status indication.
Details the commissioning steps for NCU models with On/Off control.
Details the commissioning steps for BIC models with On/Off control.
Details the commissioning steps for BIC models with proportional control.
Guides commissioning for BIC+LL models with On/Off control.
Guides commissioning for BIC+LL models with proportional control.
Provides calibration procedure for BIC models with On/Off control.
Provides calibration procedure for BIC models with proportional control.
Guides calibration for BIC+LL control station proportional control.
Lists common fault symptoms and troubleshooting actions for On/Off models.
Lists common fault symptoms and troubleshooting actions for proportional models.
Explains the data presented on the actuator's nameplate.
Details the torque specifications for different actuator models.
Provides technical data for LTQ NCU and BIC units.
Provides technical data for LTQ BIC + LED units.
Offers guidance on selecting proper wire sizes based on distance and voltage.
To Next Page