Need help?Do you have a question about the Flowserve Limitorque L120-10 and is the answer not in the manual?
Highlights critical safety notices to reduce risk of personal injury and equipment damage during operation.
Details essential warnings and precautions before and during actuator installation.
Outlines general safety checks to ensure safe actuator operation and maintenance.
Procedure to adjust the torque switch for desired torque or thrust output.
Steps involved in balancing the torque switch for accurate protection.
Instructions for setting the geared limit switch to control valve travel limits.
Detailed steps for setting the limit switch rotor segments and ensuring correct contact.
Steps to calibrate the position transmitter for a 4-20 mA output signal.
Steps for initiating electrical startup, including verifying lubrication and checking rotation.
Explains how the actuator operates when the motor is energized.
Highlights critical safety notices to reduce risk of personal injury and equipment damage during operation.
Details essential warnings and precautions before and during actuator installation.
Outlines general safety checks to ensure safe actuator operation and maintenance.
Procedure to adjust the torque switch for desired torque or thrust output.
Steps involved in balancing the torque switch for accurate protection.
Instructions for setting the geared limit switch to control valve travel limits.
Detailed steps for setting the limit switch rotor segments and ensuring correct contact.
Steps to calibrate the position transmitter for a 4-20 mA output signal.
Steps for initiating electrical startup, including verifying lubrication and checking rotation.
Explains how the actuator operates when the motor is energized.
General| Voltage | 120 VAC, 240 VAC, 480 VAC, 24 VDC |
|---|---|
| Enclosure Rating | NEMA 4 |
| Control Options | Local, Remote |
| Mounting | Multi-turn |
| Ambient Temperature Range | -40°F to 150°F (-40°C to 65°C) |
To Next Page