Need help?Do you have a question about the Flowserve Limitorque L120 Series and is the answer not in the manual?
General| Actuator Compatibility | Limitorque Actuators |
|---|---|
| Power Supply | 120/240 VAC, 12/24 VDC |
| Control Signal | 4-20 mA |
| Enclosure | NEMA 4X |
| Ambient Temperature Range | -40°F to 140°F (-40°C to 60°C) |
Details crucial safety precautions for installation, operation, and maintenance to prevent injury and equipment damage.
Essential safety warnings and precautions before and during actuator installation to prevent hazards.
Explains the function and setting of the torque switch for actuator protection.
Step-by-step guide for adjusting the torque switch settings to the desired output torque.
Introduces the geared limit switch and its importance for travel indication.
Instructions on how to set the geared limit switch for proper valve travel control.
Steps for safely starting up the actuator electrically, including checks and phase rotation.
How to engage and use the manual handwheel operation and the declutch mechanism.
Explains how the geared limit switch and torque switch control valve travel and torque.
General information on actuator lubrication, including sealed cases and thrust bases.
Procedures for inspecting lubricant levels and quality, especially after storage.
To Next Page