Flowserve Scienco SEM-10 User Manual

5
Meter Operation
Wakes up display in Current Total mode. Unit will
automatically shut off after 40 seconds with no input.
Resets Current Total to zero. Also used to enter CAL-3 mode,
and to increase the CAL
-
3 number during the
calibration
.
When depressed and held with Current Total displayed it shows Total 2.
Also used to enter the CAL-2 mode, and to decrease the CAL-3 number.
Push to enter into the three calibration modes, starting with CAL-1.

Flowserve Scienco SEM-10 Specifications

General

Brand	Flowserve
Model	Scienco SEM-10
Category	Measuring Instruments
Language	English