Need help?Do you have a question about the flsun QQ and is the answer not in the manual?
General| Layer Resolution | 0.05 - 0.4 mm |
|---|---|
| Nozzle Diameter | 0.4 mm |
| Filament Diameter | 1.75 mm |
| Connectivity | USB, SD Card |
| Frame Material | Aluminum |
| Display | LCD Touchscreen |
| Bed Temperature | Up to 100°C |
| Heated Bed | Yes |
| Nozzle Temperature | Up to 260°C |
| Input Voltage | 110V/220V |
| Compatible Materials | PLA, ABS, Wood, PVA, HIPS |
To Next Page
