flsun Delta - User Manual

1 / 121
Assembly for delta 3d printer kit
catalogue
Assembly for delta 3d printer kit.............................................................................1
1, Lower corner pieces.............................................................................................4
2,Upper corner pieces............................................................................................ 12
3, Overall pulley.....................................................................................................23
4, Auto-leveling Effector....................................................................................... 37
5, Limit switch....................................................................................................... 62
6, General assembly...............................................................................................69
7, Belt install.......................................................................................................... 77
8, Feeder motor...................................................................................................... 83
9, Motherboard Connection................................................................................... 96
11,Fixed platform.................................................................................................106
12,LCD display.................................................................................................... 115
13,How to feed filament...................................................................................... 119

flsun Delta Specifications

General

Filament Diameter	1.75 mm
Printing Technology	FDM
Layer Resolution	0.05mm - 0.3mm
Nozzle Diameter	0.4 mm (can be replaced with other sizes)
Supported Filaments	PLA, ABS, PETG, TPU
Connectivity	SD card, USB
Frame Material	Aluminum
Bed Leveling	Automatic
Bed Temperature	Up to 100°C
Nozzle Temperature	Up to 260°C
Print Speed	Up to 150mm/s

Summary

1, Lower corner pieces

2,Upper corner pieces

3, Overall pulley

4, Auto-leveling Effector

Automatic leveling principle and Introduction

Explains the principle and introduction to the auto-leveling process.

5, Limit switch

6, General assembly

7, Belt install

8, Feeder motor

9, Motherboard Connection

11,Fixed platform

12,LCD display

13,How to feed filament