Need help?Do you have a question about the flsun V400 and is the answer not in the manual?
General| Print Technology | FDM (Fused Deposition Modeling) |
|---|---|
| Layer Resolution | 0.05-0.3 mm |
| Max Print Speed | 400 mm/s |
| Filament Diameter | 1.75 mm |
| Connectivity | USB, SD Card, Wi-Fi |
| Bed Leveling | Automatic |
| Bed Temperature | Up to 110°C |
| Nozzle Temperature | Up to 300°C |
| Display Screen | 7-inch Touchscreen |
| Frame Material | Aluminum |
| Printer Type | Delta |
| Nozzle Diameter | 0.4 mm (default) |
| Supported Filaments | PLA, ABS, PETG, TPU |
Detailed technical specifications including model, printing size, molding tech, and nozzle diameter.
Identifies and labels the main components and parts of the FLSUN V400 3D printer.
Lists all included main and gift parts for the printer setup.
Guide to adjust the printer's input voltage from 230V to 115V or vice-versa.
Step-by-step guide to install the leveling switch and perform automatic bed leveling.
Instructions on how to properly cut and insert filament into the printer's extruder.
Explains printing via U disk and online connection.
Guide on fine-tuning the nozzle height for optimal first layer adhesion during printing.
Step-by-step instructions for installing the Ultimaker Cura slicing software.
To Next Page
