Advice and Guidance
Flsun V400 , Amazing Speed!
Advice and Guidance
1. Do not operate the printer in ways other than those specified in the manual, to avoid personal safety
problems and property damage.
2. The default power input voltage of the printer is 230V. If the local voltage is 115V, make sure to
switch the input voltage before starting the printer.
3. The assembly videos,configuration file and slicing software are included U disk,please back up the
files of U disk to your computer before using.
4. Don't place the printer near inflammable, explosive or high heat source, ensure that the printer is in a
safe and stable printing environment.
5. When the printer is running, don't touch the high-temperature parts, such as hot bed and nozzle, to
avoid high temperature burns.
6. Children and untrained personnel are not allowed to use the printer alone.
7. It is recommended to use filament recommended by the manufacturer, which can not only reduce the
blockage of nozzle, but also ensure the printing quality.
8. In order to ensure the service life of the printer, regular maintenance of the printer, especially the
effector module and line rail and other important parts.
9. In case of emergency during printing, please click the emergency stop button on the screen or directly
turn off the power.
1
To Next Page
Loading...
