Fluance Ai61 - Subwoofer Output; Frequently Asked Questions

Fluance Ai61 Quick Start Guide
Frequently Asked Questions
What is “auto-pairing” and how does it work?
Auto-pairing is a convenient connection feature included in all Fluance Bluetooth
®
Speakers. If the
connected Bluetooth
®
-enabled device leaves the connection range of the Ai61 and
returns at a later time, the device will automatically connect. If the device’s Bluetooth
®
function is disabled and then enabled at a later time, the device will automatically connect
as well.
*Note: The Fluance Ai61 will only auto-pair to the last device that it was connected to.
Another device is connected to my Fluance Ai61 and I want to connect my device.
You can reset any Bluetooth
®
connection by pressing the Bluetooth
®
Pairing Reset button
on the back of the Active Speaker. You can also press and hold “Play/Pause” on the Remote for 3
seconds.
How can I increase the volume when using the Ai61 with a turntable?
If turntable audio is too quiet you may need to add a preamplier. Some turntables have built in
preamps which can be turned on or o. The Fluance PA10 preamplifier is a great match for Fluance
powered speakers and turntables.
Why is the volume from each input dierent on the Ai61?
Ensure that any volume and EQ settings on your source devices are set to similar levels. The
dierent signal types used by each input means they are processed differently by the Ai61. The
Optical Input uses a digital signal while the RCA Input uses an analog signal. These dierences can
result in slight variances in the output volume of the Ai61.
Subwoofer Output
IMPORTANT: When a subwoofer cable is connected, the Ai61 will automatically cut frequencies
below 80Hz to optimize performance. The subwoofer cable must be removed to resume full fre-
quency playback.
1. Connect the Subwoofer cable to your powered subwoofer.
2. Connect the other end of the Subwoofer cable to the back of the Active Speaker.
3. Adjust the volume on the Subwoofer for the best listening experience.
Fluance oers matching subwoofers for the ultimate audio experience. For more information visit:
www.Fluance.com/subwoofer.
DB10
*Subwoofer cable not included