1
Introduction
This document defines the remote interface commands for the 5560A/5550A/5540A Calibrator (the
Product or Instrument). A computer can connect through any of the remote interface ports to change
settings, read measurement data, and control the operation of the Product. Command syntax and
names follow the IEEE-488.2 standards.
Contact Fluke Calibration
Fluke Corporation operates worldwide. For local contact information, go to our website:
www.flukecal.com
To register your product, view, print, or download the latest manual or manual supplement, go to our
website.
Fluke Corporation
P.O. Box 9090
Everett, WA 98206-9090
+1-425-446-5500
info@flukecal.com
To Next Page
Loading...
