Reference Multimeter and 8 ½ Digit Multimeter
SCPI Commands Reference
29
Table 6. Command Summary (cont.)
Keyword Description
"DIGitze:CURRent" Sets function to digitize current
"DIGitze:VOLTage" Sets function to digitize voltage
"FREQuency" Sets function to Frequency
"FRESistance" Sets function to 4-wire Resistance
"PERiod" Sets function to Period
"POWer" Sets function to Power
"RESistance" Sets function to 2-wire Resistance
"TEMPerature:FRTD" Sets function to 4-wire PRT
"TEMPerature:RTD" Sets function to 2-wire PRT
"TEMPerature:TCouple" Sets function to thermocouple
"TEMPerature:TRTD" Sets function to 3-wire PRT
"VOLTage[:DC]" Sets function to DCV
"VOLTage:AC" Sets function to ACV
"XCURRent[:DC]" Sets function to DCI with external shunt
"XCURRent:AC" Sets function to ACI with external shunt
[:SENSe]:FUNCtion? Returns selected function
[:SENSe]:Period
:COUPling AC|DC Sets the Period path to ac or dc coupled
:COUPling? Returns the coupling setting
:BWLimit[:STATe] <boolean> Sets the bandwidth limit ON or OFF
:BWLimit[:STATe]? Returns the Bandwidth limit setting
:GATE <nrf>|MIN|MAX|DEF
Set gate time to the numeric value or to the MIN, MAX, or
Default setting
:GATE? [MIN|MAX|DEF]
Returns the selected gate setting, or if specified, the MIN, MAX,
or Default gate setting
:ROUTe:BNC:IMPedance 50R|HIGH Sets the impedance for the rear panel BNC input
:ROUTe: BNC:IMPedance? Returns the impedance set for the rear panel BNC input
:ROUTe: BNC:THReshold
<numeric>|MIN|MAX|DEF
Set Threshold to the numeric value or to the MIN, MAX, or
Default threshold setting (-5.0 V to 5.0 V)
:ROUTe: BNC:THReshold?
[MIN|MAX|DEF]
Return the Threshold numeric value or if specified, the MIN,
MAX, or Default threshold setting
To Next Page
Loading...