Fluke Calibration 8588A - Page 73

Reference Multimeter and 8 ½ Digit Multimeter
Error Codes
69
-222, "Data out of range;Invalid shunt power coefficient",
-222, "Data out of range;Frequency invalid for shunt ac-dc
difference entry",
-222, "Data out of range;Shunt ac-dc difference value invalid",
-222, "Data out of range;Port value is out of range (1024 to
65535)",
-222, "Data out of range;Numeric value cannot be zero",
-222, "Data out of range;Ethernet hostname too long",
-223, "Too much data;Input buffer full",
-223, "Too much data;Line too long (greater than 350 characters)",
-223, "Too much data;Command Buffer Overflow",
-224, "Illegal parameter value;Ethernet MAC address not valid",
-224, "Illegal parameter value;Ethernet address not valid",
-224, "Illegal parameter value;Ethernet hostname not valid",
-224, "Illegal parameter value",
-224, "Illegal parameter value;RTC/System time format invalid",
-224, "Illegal parameter value;RTC/System date format invalid",
-224, "Illegal parameter value;Invalid shunt asset name",
-224, "Illegal parameter value;Invalid shunt manufacturer",
-224, "Illegal parameter value;Invalid shunt model",
-224, "Illegal parameter value;Invalid shunt serial number",
-224, "Illegal parameter value;Invalid secure code",
-224, "Illegal parameter value;Adjustment target invalid",
-230, "Data corrupt or stale",
-240, "Hardware Error;Adjustment action not possible;invalid
instrument model",
-250, "Mass storage error;Could not save setting",
-250, "Mass storage error;Failed to delete shunt ac-dc difference
item",
-250, "Mass storage error;Failed to delete shunt properties",
-250, "Mass storage error;Shunt properties cannot be saved",
-250, "Mass storage error;Unknown NV constant",
-250, "Mass storage error;Empty NV constant",
-291, "Out of memory",