Fluke 106 - Test Diodes (107 Only)

106/107
Users Manual
14
Measure AC or DC Current
 Warning
To prevent possible electrical shock, fire, or personal injury, remove circuit power
before you connect the Product in the circuit when you measure current. Connect
the Product in series with the circuit.
1. Turn the rotary switch to
.
2. Push the YELLOW button to toggle between ac or dc current measurement.
3. Connect the red test lead to the A terminal to be measured and connect the black test
lead to the COM terminal.
4. Break the circuit path to be measured.
5. Connect the test leads across the break and apply power.
6. Read the measured current on the display.
www.GlobalTestSupply.com
Find Quality Products Online at: sales@GlobalTestSupply.com