EasyManuals Logo

Fluke 1630-2 Calibration Manual

Fluke 1630-2
22 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #5 background imageLoading...
Page #5 background image
1
Introduction
XW Warning
To prevent electric shock or personal injury, do not perform the calibration
verification tests or calibration procedures described in this manual unless
you are qualified to do so. The information provided in this manual is for the
use of qualified personnel only.
The Fluke 1630-2/1630-2FC Earth Ground Clamp (the Product or Clamp) is a hand-held, battery-operated
clamp that measures the ground resistance without auxiliary ground rods and AC leakage current. The
Clamp is used in multi-grounded systems without disconnecting the ground under test.
For complete operating instructions, refer to the Users Manual at www.fluke.com
.
How to Contact Fluke
Fluke Corporation operates in more than 50 countries worldwide. For more contact information, go to our
website: www.fluke.com.
To register your product, view, print, or download the latest manual or manual supplement, go to
www.fluke.com
.
Fluke Corporation
6920 Seaway Blvd
Everett, WA 98203
+1-425-446-5500
fluke-info@fluke.com
.

Other manuals for Fluke 1630-2

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Fluke 1630-2 and is the answer not in the manual?

Fluke 1630-2 Specifications

General IconGeneral
TypeEarth Ground Clamp Meter
Ground Resistance Range0.025 Ω to 1500 Ω
DisplayLCD
Data LoggingYes
Operating Temperature-10 °C to 50 °C
Storage Temperature-20 °C to 60 °C
Ground Resistance Accuracy±(1.5% + 0.02 Ω)
Jaw Opening32 mm
Power SupplyAA batteries
Safety RatingCAT IV 600 V

Related product manuals