Fluke 1732 User Manual

February 2017
©2017 Fluke Corporation. All rights reserved.
All product names are trademarks of their respective companies.
Specifications are subject to change without notice.
1732/1734
Energy Logger
Users Manual
Test Equipment Depot - 800.517.8431 - 99 Washington Street Melrose, MA 02176 - TestEquipmentDepot.com

Fluke 1732 Specifications

General

Data Logging	Yes
Power Quality Parameters	Voltage, current, harmonics, flicker, unbalance
Connectivity	USB
Harmonic Measurement	Up to 50th harmonic
Memory	4 GB internal memory

Summary

Limited Warranty and Liability

Safety Information

Before You Start

WiFi and WiFi/BLE-to-USB Adapter

Thin-Flexi Current Probe

Storage

Power Supply

Details the removable power supply, its connection, and how it converts line power.

Battery Operation

Navigation and User Interface

Power

Mains Power Source

Instructions for connecting and using the mains power supply for the Logger.

Measurement Line Power Source

Instructions for powering the Logger using the measurement line source.

Battery Power Source

Explains how the Logger operates on battery power and how to check battery status.

Touch Screen

Basic Navigation

First-time Use and Setup Wizard

First Measurements

Function Selection Buttons

Meter Mode

Measurement Configuration

Current Range Configuration

Auxiliary Input Configuration

Wireless Connection to Fluke Connect Modules

Wired Auxiliary Input Connection

Connection Verification and Correction

Verification Process

Details the verification process and toggling between Generator and Motor modes.

Digital Correction

Power Measurements

Logger Mode

Logging Session Setup

Details parameters for setting up a logging session, including name, duration, and intervals.

Logging Session Duration and Timing

Averaging Interval Configuration

Logging Session Review

Memory and Settings Management

Instrument Settings Configuration

Date, Time, and Time Zone Settings

Touch Screen Calibration

WiFi Configuration

Reset to Factory Defaults

Firmware Update

Licensed Features Activation

Maintenance

Battery Replacement Procedure

Service and Replacement Parts

Energy Analyze Plus Software

Software System Requirements

Electrical Specifications Overview

Power Supply Specifications

Details voltage range, mains power, power consumption, efficiency, and battery power.

Auxiliary Input Specifications

Data Acquisition Specifications

Wiring Configurations Guide

iFlex Probe Specifications

Accuracy at Reference Conditions

Power and Energy Measurements

Intrinsic Uncertainty Specifications