Fluke 189 - Basic Maintenance; Removing and Reinserting the Circuit Board Assembly

True RMS Multimeter
Setup Selections
15
Table 5. Common Setup Selections
Selection Option Choices Factory Default
bEEP Beeper yE5 or no (flashing) Use < > to select. yE5
8888 Display digits 8888 (4) or 88888 (5) Use < > to select. 88888
bLoFF Backlight time out MM:SS - Use q to increment or decrement minute or
second values.
Use
< > to select minutes or seconds. Selected values
flash. Setting value to 00:00 disables timeout.
15:00
Pr0FF Power off time out HH:MM - Use q to increment or decrement hour or minute
values.
Use
< > to select hours or minutes. Selected values flash.
00:15
Hour 24-hour clock HH:MM - Use q to increment or decrement hour or minute
values.
Use
< > to select hours or minutes. Selected values flash.
00:00
50-60 Line/Main frequency 60 or 50 (flashing) - Use < > to select. 60
Fcty Restore factory defaults yE5 or no (flashing) - Use < > to select. no