EasyManuals Logo

Fluke 287 Calibration Manual

Fluke 287
36 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #16 background imageLoading...
Page #16 background image
287/289
Calibration Manual
8
Temperature Specifications
Temperature Resolution Accuracy
[1,2]
-200 °C to +1350 °C 0.1 °C
1 % + 10
-328 °F to +2462 °F 0.1 °F
1 % + 18
[1] Does not include error of the thermocouple probe.
[2] Accuracy specification assumes ambient temperature stable to ±1 °C. For ambient temperature changes of ±5 °C, rated accuracy
applies after 2 hours.
Capacitance and Diode Test Specifications
Function Range Resolution Accuracy
1 nF
[1]
0.001 nF 1 % + 5
10 nF
[1]
0.01 nF 1 % + 5
100 nF
[1]
0.1 nF 1 % + 5
1 μF 0.001 μF
1 % + 5
10 μF 0.01 μF
1 % + 5
100 μF 0.1 μF
1 % + 5
1000 μF 1 μF
1 % + 5
10 mF 0.01 mF 1 % + 5
Capacitance
100 mF 0.1 mF 2 % + 20
Diode Test 3.1 V 0.0001 V 1 % + 20
[1] With a film capacitor or better, using relative mode (REL Δ) to zero residual.
Frequency Counter Specifications
Function Range Resolution Accuracy
99.999 Hz 0.001 Hz 0.02 % + 5
999.99 Hz 0.01 Hz 0.005 % + 5
9.9999 kHz 0.0001 Hz 0.005 % + 5
99.999 kHz 0.001 Hz 0.005 % + 5
[1]
Frequency
(0.5 Hz to 999.99 kHz, pulse
width >0.5 μs)
999.99 kHz 0.01 Hz 0.005 % + 5
Duty Cycle
[2][3]
1.00 % to 99.00 % 0.01 % 0.2 % per kHz + 0.1 %
0.1000 ms 0.0001 ms 0.002 ms + 3 counts
1.000 ms 0.001 ms 0.002 ms + 3 counts
10.00 ms 0.01 ms 0.002 ms + 3 counts
Pulse Width
[2][3]
1999.9 ms 0.1 ms 0.002 ms + 3 counts
[1] For 64.000 kHz to 67.000 kHz, accuracy = ±5 Hz, at -20 to +55 °C with R.H. 0 % to 90 % (0 °C to 37 °C), 0 % to 65 % (37 °C to 45
°C), 0 % to 45 % (45 °C to 55 °C).
[2] For rise times <1 μs. Signals centered around trigger levels.
[3] 0.5 to 200 kHz, pulse width >2 μs. Pulse width range is determined by the frequency of the signal.

Table of Contents

Other manuals for Fluke 287

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Fluke 287 and is the answer not in the manual?

Fluke 287 Specifications

General IconGeneral
Data holdYes
Product typeDigital multimeter
Product colorGrey, Yellow
Frequency range0 - 999.99 kHz
DC current range0 - 10 A
DC voltage range0 - 1000 V
Resistance range0 - 500000000 Ω
Capacitance range0 - 100000 nF
Resolution (AC voltage)0.001 mV
Basic accuracy (frequency)0.005%
Basic accuracy (DC current)0.05%
Basic accuracy (DC voltage)0.025
Temperature measurement range-200 - 1350 °C
Battery typeAA
Power sourceBattery
Battery technologyAlkaline
Number of batteries supported6
Storage temperature (T-T)-40 - 60 °C
Operating temperature (T-T)-20 - 55 °C
Operating relative humidity (H-H)0 - 90 %
Display digits4.5 digits
Weight and Dimensions IconWeight and Dimensions
Depth60 mm
Width102 mm
Height222 mm
Weight870.9 g

Related product manuals