Clamp Meter
Safety Information
5
Table 1. Symbols
Symbol Meaning Symbol Meaning
AC (Alternating Current)
Earth ground
DC (Direct Current)
This product complies with the WEEE
Directive (2002/96/EC) marking
requirements. The affixed label indicates
that you must not discard this
electrical/electronic product in domestic
household waste. Product Category: With
reference to the equipment types in the
WEEE Directive Annex I, this product is
classed as category 9 "Monitoring and
Control Instrumentation” product. Do not
dispose of this product as unsorted
municipal waste. Go to Fluke’s website for
recycling information.
Note
This product complies with the
Regulation for the Administration of the
Recovery and Disposal of Waste
Electrical and Electronic Products
(China).
Hazardous voltage. Risk of
electric shock.
Conforms to European Union directives.
Risk of Danger. Important
information. See Manual.
Double insulated
Battery
Application to or removal from hazardous,
live conductors is permitted.
CAT II
Measurement category II is
applicable to test and
measuring circuits connected
directly to utilization points of
low voltage mains installation.
CAT III
Measurement Category III is applicable to
test and measuring circuits connected to the
distribution part of the building’s low-voltage
MAINS installation.
CAT IV
Measurement Category IV is
applicable to test and
measuring circuits connected
at the source of the building’s
low-voltage MAINS
installation.
This product has been tested to the
requirements of CAN/CSA-C22.2
No. 61010-1, second edition, including
Amendment 1, or a later version of the
same standard incorporating the same
level of testing requirements.
Note
The Measurement Category (CAT) and voltage rating of combinations of
test probes, test probe accessories, current clamp accessories, and the
Product is the LOWEST rating of individual components.
w ww. . com
information@itm.com1.800.561.8187
To Next Page
Loading...
