323/324/325
Calibration Manual
4
Table 1. Symbols
Symbol Meaning Symbol Meaning
Hazardous voltage. Risk of
electric shock.
Risk of Danger. Important information. See
Manual.
AC (Alternating Current)
DC (Direct Current)
AC and DC Current Earth Terminal
Double insulated
Battery
Application to or removal from
hazardous, live conductors is
permitted.
Conforms to European Union directives.
Conforms to relevant
Australian EMC standards.
Inspected and licensed by TÜV Product
Services.
This product has been tested
to the requirements of
CAN/CSA-C22.2 No. 61010-1,
second edition, including
Amendment 1, or a later
version of the same standard
incorporating the same level of
testing requirements.
Conforms to European Union directives.
CAT II
Measurement category II is
applicable to test and
measuring circuits connected
directly to utilization points of
low voltage mains installation.
CAT III
Measurement Category III is applicable to
test and measuring circuits connected to the
distribution part of the building’s low-voltage
MAINS installation.
CAT IV
Measurement Category IV is
applicable to test and
measuring circuits connected
at the source of the building’s
low-voltage MAINS
installation.
This product complies with the WEEE
Directive (2002/96/EC) marking
requirements. The affixed label indicates
that you must not discard this
electrical/electronic product in domestic
household waste. Product Category: With
reference to the equipment types in the
WEEE Directive Annex I, this product is
classed as category 9 "Monitoring and
Control Instrumentation” product. Do not
dispose of this product as unsorted
municipal waste. Go to Fluke’s website for
recycling information.
Note
This product complies with the
Regulation for the Administration of the
Recovery and Disposal of Waste
Electrical and Electronic Products
(China).
To Next Page
Loading...
